New
Zoom the image with the mouse
ETL Systems
ETL Systems STA5620-QQ1 200W Q-Band Outdoor TWTA
Product Code:
STA5620-QQ1
Weight:
21.00 KGS
Width:
25.40
(cm)
Height:
25.40
(cm)
Depth:
52.00
(cm)
Request a quote at Contact@orbitalconnect.com or +1.888.218.9394
| KEY SPECIFICATIONS | |
| Product Type | TWTA Amplifier |
| Frequency Band | Q-Band |
| Frequency Range | QQ1: 43.5 - 45.5 GHz |
| Output Power | 200W TWT (52.78 dBm) / 137W HPA rated (51.37 dBm) |
| Environment | Outdoor (antenna mount) |
| RF PERFORMANCE | |
| Frequency range* | QQ1: 43.5 - 45.5 GHz |
| Output Power, TWT Power, CW | 200W (52.78 dBm) |
| Output Power, HPA Rated, CW | 137W (51.37 dBm) |
| Gain Rated Output | ≥ 70 dB |
| Gain Small Signal (SSG) | ≥ 65 dB |
| SSG Variation, over 2000 MHz | ≤ 1.5 dB |
| SSG Variation, over 500 MHz | ≤ 0.8 dB |
| SSG Variation, over 100 MHz | ≤ 0.4 dB |
| Slope, ΔG SLOPE | ± 0.02 dB/MHz max |
| Gain Stability vs. Time | ± 0.20 dB max / 24hrs @ constant drive and temperature |
| Gain Stability vs. Temperature | ± 0.02 dB max / °C max @ constant drive and frequency |
| Adjustment range, G ADJ | 30.0 dB typical |
| Adjustment step size | 0.1 dB |
| AM/PM | ≤ 3°/dB @ 46.77 dBm (47.5W) |
| Inter-modulations (IMD) 2-tone | ≤ -17 dBc at 48.78 dBm (75.5W) / ≤ -25 dBc at 50.41 dBm (110W) with Linearizer |
| Spectral Re-growth (SR) | ≤ -30 dBc at 50.41 dBm (110W) |
| Noise power, Transmit band | ≤ –70 dBW/4 kHz |
| Noise power, Receive band | ≤ –150 dBW/4 kHz |
| Spurious @ PO ≤ MLP | ≤ -60 dBc |
| Residual AM | ≤ –50 dBc, f < 10kHz; ≤ -20(1.5+LOG(frequency KHz))dBc, f = 10KHz to 500KHz; ≤ -85 dBc >500KHz |
| Phase Noise | 10dB below IESS requirement; ≤ -47 dBc max, Continuous; ≤ -50 dBc max, AC fundamental; ≤ -60 dBc max, Sum of all spurs; ≤ -60 dBc max, Harmonic 2nd |
| Group Delay (any 80 MHz), Linear | 0.01 nsec/MHz, max |
| Group Delay (any 80 MHz), Parabolic | 0.005 nsec/MHz², max |
| Group Delay (any 80 MHz), Ripple | 0.5 nsec/Peak-Peak, max |
| Input VSWR (Return Loss) | ≤ 1.25:1 (19.1 dB) |
| Output VSWR (Return Loss) | ≤ 1.25:1 (19.1 dB) |
| Load VSWR (Full perf.) | ≤ 2.0:1 (9.5 dB) |
| Load VSWR (no damage) | ≤ 2.0:1 (9.5 dB) |
| *Note | Other frequency bands are available including BUC options covering 1GHz, consult ETL Systems for details. Peak/output power and frequency range must be selected at time of purchase, as these options are TWT dependent and cannot be changed in the field. |
| ELECTRICAL | |
| AC Input Voltage | 100-240 VAC ± 10%, single phase, 47-63 Hz |
| Power consumption | 1200 VA maximum, 1100 VA typical |
| Power factor | 0.95 typical |
| ENVIRONMENTAL | |
| Operating temperature | -40˚C to +60˚C (out of direct sunlight); -40°C to +55°C (direct sunlight) |
| Storage temperature | -54˚C to +71˚C |
| Relative humidity | 100% condensing |
| Altitude | 12,000 ft. with standard adiabatic de-rating of 2°C/1000 ft., operating; 50,000 ft., non-operating |
| Shock | 15 g peak, 11mSec, 1/2 sine |
| Vibration | 3.2 g rms, 10-500 Hz |
| Acoustic Noise | 65 dBA @ ≥ 3 ft. from amplifier |
| PHYSICAL | |
| Dimensions (request outline) | 52 cm deep x 25.4 cm width x 25.4 cm height |
| Weight | 21 kg typical |
| Cooling | Forced air with integral blower |
| RF Input | WR-22 |
| RF Output | WR-22 |
| RF Sample port | 1.85mm Female (Optional 2.4mm) |
| AC Input | Amphenol C016 20C003 200 12 |
| Ethernet | RJF71B (IP67 RJ45 Connector) |
| M&C Connector | PT07E18-32S (MS3114E-18-32S) |
5 customers are viewing this product
Details
| KEY SPECIFICATIONS | |
| Product Type | TWTA Amplifier |
| Frequency Band | Q-Band |
| Frequency Range | QQ1: 43.5 - 45.5 GHz |
| Output Power | 200W TWT (52.78 dBm) / 137W HPA rated (51.37 dBm) |
| Environment | Outdoor (antenna mount) |
| RF PERFORMANCE | |
| Frequency range* | QQ1: 43.5 - 45.5 GHz |
| Output Power, TWT Power, CW | 200W (52.78 dBm) |
| Output Power, HPA Rated, CW | 137W (51.37 dBm) |
| Gain Rated Output | ≥ 70 dB |
| Gain Small Signal (SSG) | ≥ 65 dB |
| SSG Variation, over 2000 MHz | ≤ 1.5 dB |
| SSG Variation, over 500 MHz | ≤ 0.8 dB |
| SSG Variation, over 100 MHz | ≤ 0.4 dB |
| Slope, ΔG SLOPE | ± 0.02 dB/MHz max |
| Gain Stability vs. Time | ± 0.20 dB max / 24hrs @ constant drive and temperature |
| Gain Stability vs. Temperature | ± 0.02 dB max / °C max @ constant drive and frequency |
| Adjustment range, G ADJ | 30.0 dB typical |
| Adjustment step size | 0.1 dB |
| AM/PM | ≤ 3°/dB @ 46.77 dBm (47.5W) |
| Inter-modulations (IMD) 2-tone | ≤ -17 dBc at 48.78 dBm (75.5W) / ≤ -25 dBc at 50.41 dBm (110W) with Linearizer |
| Spectral Re-growth (SR) | ≤ -30 dBc at 50.41 dBm (110W) |
| Noise power, Transmit band | ≤ –70 dBW/4 kHz |
| Noise power, Receive band | ≤ –150 dBW/4 kHz |
| Spurious @ PO ≤ MLP | ≤ -60 dBc |
| Residual AM | ≤ –50 dBc, f < 10kHz; ≤ -20(1.5+LOG(frequency KHz))dBc, f = 10KHz to 500KHz; ≤ -85 dBc >500KHz |
| Phase Noise | 10dB below IESS requirement; ≤ -47 dBc max, Continuous; ≤ -50 dBc max, AC fundamental; ≤ -60 dBc max, Sum of all spurs; ≤ -60 dBc max, Harmonic 2nd |
| Group Delay (any 80 MHz), Linear | 0.01 nsec/MHz, max |
| Group Delay (any 80 MHz), Parabolic | 0.005 nsec/MHz², max |
| Group Delay (any 80 MHz), Ripple | 0.5 nsec/Peak-Peak, max |
| Input VSWR (Return Loss) | ≤ 1.25:1 (19.1 dB) |
| Output VSWR (Return Loss) | ≤ 1.25:1 (19.1 dB) |
| Load VSWR (Full perf.) | ≤ 2.0:1 (9.5 dB) |
| Load VSWR (no damage) | ≤ 2.0:1 (9.5 dB) |
| *Note | Other frequency bands are available including BUC options covering 1GHz, consult ETL Systems for details. Peak/output power and frequency range must be selected at time of purchase, as these options are TWT dependent and cannot be changed in the field. |
| ELECTRICAL | |
| AC Input Voltage | 100-240 VAC ± 10%, single phase, 47-63 Hz |
| Power consumption | 1200 VA maximum, 1100 VA typical |
| Power factor | 0.95 typical |
| ENVIRONMENTAL | |
| Operating temperature | -40˚C to +60˚C (out of direct sunlight); -40°C to +55°C (direct sunlight) |
| Storage temperature | -54˚C to +71˚C |
| Relative humidity | 100% condensing |
| Altitude | 12,000 ft. with standard adiabatic de-rating of 2°C/1000 ft., operating; 50,000 ft., non-operating |
| Shock | 15 g peak, 11mSec, 1/2 sine |
| Vibration | 3.2 g rms, 10-500 Hz |
| Acoustic Noise | 65 dBA @ ≥ 3 ft. from amplifier |
| PHYSICAL | |
| Dimensions (request outline) | 52 cm deep x 25.4 cm width x 25.4 cm height |
| Weight | 21 kg typical |
| Cooling | Forced air with integral blower |
| RF Input | WR-22 |
| RF Output | WR-22 |
| RF Sample port | 1.85mm Female (Optional 2.4mm) |
| AC Input | Amphenol C016 20C003 200 12 |
| Ethernet | RJF71B (IP67 RJ45 Connector) |
| M&C Connector | PT07E18-32S (MS3114E-18-32S) |
Related Products
