null Skip to main content
Zoom the image with the mouse

Comtech

Comtech CDM-650 Satellite Modem

No reviews yet
Condition: New
Availability: YES
Weight: 5.50 KGS
Width: 48.26 (cm)
Height: 4.40 (cm)
Depth: 40.80 (cm)

Request a quote at Contact@orbitalconnect.com or +1.888.315.9545

Overview
The CDM-650 Satellite Modem is designed for use by foreign government entities that need a modem which employs state-of-the-art modulation and coding techniques to optimize satellite transponder bandwidth usage while retaining backward compatibility with a wide range of Comtech EF Data modems currently in use. The CDM-650 leverages the heritage and feature set of our very successful SLM-5650B/C, CDM-625A and CDM-425 modems. The CDM-650
supports backwards compatibility / interoperability in certain modes of operation with the SLM5650B/C, CDM-625A and CDM-425 modems.
The CDM-650 offers data rates from 18 kbps to 155 Mbps and symbol rates from 32 ksps to 64 Msps (coding / FEC dependent). The modem supports an Ethernet 10/100/1000T user traffic data interface that can be used in Bridge mode or Routed mode offering Quality of Service protocols and traffic shaping / congestion control methods.
Advanced forward error correction (FEC) capabilities are a Comtech EF Data standard feature. Turbo Product Codes (TPC), and three Low Density Parity Check codes (LDPC) families, VersaFEC®-2 high performance LDPCs short and long block and Direct Sequence Spread Spectrum (DSSS) are all supported.
Direct sequence spread spectrum is available to support both point-to-point and point-to-multipoint applications as an option in conjunction with LDPC-based FEC and BPSK. Spreading factors up to 64 are supported. Maximum supported chip rate is 64 Mcps.
Spread spectrum results in operation with ultra-low power spectral densities. This enables use of small antenna apertures when adjacent satellite interference (ASI) is an important consideration.
The IF interface supports 950 to 2000 MHz frequency ranges.


Features
• Support for bridged point-to-multipoint network
architecture
• BPSK, QPSK, OQPSK, 8-ARY, 16-ARY, 32-ARY
• TPC, LDPC family, VersaFEC-2, DSSS
• Direct sequence spread spectrum, integer factors
2,3,4…62, 63, 64
• Direct sequence spread spectrum, chip rates
up to 64 Mcps
• 18 kbps to 155.52 Mbps
• Asymmetrical loop timing & data source bit
synchronization
• Ethernet interface for remote control using HTTP, Telnet
and Simple Network Management Protocol (SNMP)
• EIA-232 interface for remote control
• LNB reference and voltage
• BUC reference

5 customers are viewing this product
Share:
  • Norton Secured
  • TRUSTe Verified
  • Authorized.net
  • Accredited Business
  • Verified by Visa
  • Mastercard SecureCode
 

Overview
The CDM-650 Satellite Modem is designed for use by foreign government entities that need a modem which employs state-of-the-art modulation and coding techniques to optimize satellite transponder bandwidth usage while retaining backward compatibility with a wide range of Comtech EF Data modems currently in use. The CDM-650 leverages the heritage and feature set of our very successful SLM-5650B/C, CDM-625A and CDM-425 modems. The CDM-650
supports backwards compatibility / interoperability in certain modes of operation with the SLM5650B/C, CDM-625A and CDM-425 modems.
The CDM-650 offers data rates from 18 kbps to 155 Mbps and symbol rates from 32 ksps to 64 Msps (coding / FEC dependent). The modem supports an Ethernet 10/100/1000T user traffic data interface that can be used in Bridge mode or Routed mode offering Quality of Service protocols and traffic shaping / congestion control methods.
Advanced forward error correction (FEC) capabilities are a Comtech EF Data standard feature. Turbo Product Codes (TPC), and three Low Density Parity Check codes (LDPC) families, VersaFEC®-2 high performance LDPCs short and long block and Direct Sequence Spread Spectrum (DSSS) are all supported.
Direct sequence spread spectrum is available to support both point-to-point and point-to-multipoint applications as an option in conjunction with LDPC-based FEC and BPSK. Spreading factors up to 64 are supported. Maximum supported chip rate is 64 Mcps.
Spread spectrum results in operation with ultra-low power spectral densities. This enables use of small antenna apertures when adjacent satellite interference (ASI) is an important consideration.
The IF interface supports 950 to 2000 MHz frequency ranges.


Features
• Support for bridged point-to-multipoint network
architecture
• BPSK, QPSK, OQPSK, 8-ARY, 16-ARY, 32-ARY
• TPC, LDPC family, VersaFEC-2, DSSS
• Direct sequence spread spectrum, integer factors
2,3,4…62, 63, 64
• Direct sequence spread spectrum, chip rates
up to 64 Mcps
• 18 kbps to 155.52 Mbps
• Asymmetrical loop timing & data source bit
synchronization
• Ethernet interface for remote control using HTTP, Telnet
and Simple Network Management Protocol (SNMP)
• EIA-232 interface for remote control
• LNB reference and voltage
• BUC reference

 
Comtech CDM-650 Satellite Modem

Customer Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Flexible Shipping Terms

UPS, FedEx, DHL

Extended Warranty

Contact our agents

Loyalty Program

Additional savings on return customers

24/7 Technical Support

+1.844.636.3262