Swedish Microwave Products

Swedish Microwave Products

  • AESA Upconverter Modules AESA Upconverter Modules

    AESA Upconverter Modules

    SMW

    New Product Launch!AESA Modular – our most advanced products to date.Active Electronically Scanned Array (AESA) Frequency Converter Modules, designed for integration in AESA antennas. • Compact & Lightweight – 25.4 mm / 1.0 inch...
    Quick view
  • AESA Downconverter Modules AESA Downconverter Modules

    AESA Downconverter Modules

    SMW

    New Product Launch!AESA Modular – our most advanced products to date.Active Electronically Scanned Array (AESA) Frequency Converter Modules, designed for integration in AESA antennas. • Compact & Lightweight – 25.4 mm / 1.0 inch...
    Quick view
  • Power supply Power supply

    Power supply

    SMW

    The TDK Lambda PSU is a AC/DC PSU series recommended for SMW RF over Fiber products and available from stock. As standard it’s made for mounting indoors on a DIN rail. Recommended for use with:– Dual DC inserter (for Fiber LNB)– Bias...
    Quick view
  • Waveguide isolators Waveguide isolators

    Waveguide isolators

    SMW

    A waveguide isolator transfers RF signals in only one direction on the waveguide with minimum loss. This is very useful in cases where a very low input SWR is needed or to reduce reverse direction interfering signals. All isolators are designed and...
    Quick view
  • Depolarizer LHC & RHC Ku-Band Depolarizer LHC & RHC Ku-Band

    Depolarizer LHC & RHC Ku-Band

    SMW

    SMW (Swedish Microwave) Depolarizer converts circular polarizations LHC & RHC (Left Hand Circular & Right Hand Circular) to linear polarizations. Matches SMW OMT, SMW Twin and SMW Quattro. Use SMW Depolarizer + OMT Ku + LNB (WR75) + Waveguide...
    Quick view
  • Monitoring & Control Startkit Monitoring & Control Startkit

    Monitoring & Control Startkit

    SMW

      Features:• Complete hardware kit to connect a PC to LNB or BDC• For setup and reading of Alarms for troubleshooting• Redundancy switching, incl first input stage (LNA) current monitoring• Functions such as Band (LO) switching,...
    Quick view
  • Bias Tee DC Inserter Bias Tee DC Inserter

    Bias Tee DC Inserter

    SMW

    The Bias-Tee is used when a external DC input isneeded because Receiver or Modem don’t have DC out orthe installation require an external DC feed. Connector IN (A) F-connector, N-connector, SMA-connector DC connector (B) F-connector,...
    Quick view
  • 10 MHz Diplexer & DC Inserter 10 MHz Diplexer & DC Inserter

    10 MHz Diplexer & DC Inserter

    SMW

    The L-Band DC Inserter (LNB) 10 MHz Diplexer (LNB or BUC) is used when an external 10 MHz reference signal input is needed for an LNB or BUC. Recommended to use with SMW 10 MHz ref. oscillator or another 10 MHz signal source. Separate DC insertion (max...
    Quick view
  • 10 MHz Diplexer 10 MHz Diplexer

    10 MHz Diplexer

    SMW

    The L-Band 10 MHz Diplexer is used when an external 10 MHz reference signal input is needed for an LNB or BUC. Used together with SMW 10 MHz reference oscillator or other 10 MHz signal source. Connector IN (A) F-connector, N-connector,...
    Quick view
  • AGC Line Amplifier AGC Line Amplifier

    AGC Line Amplifier

    SMW

    The AGC (Automatic Gain Control) Line Amplifier 0-30 dB is intended for situations where you need a constant level output from a LNB. Due to it’s very high IP3 together with the AGC it is usually possible to place the unit very close to the LNB...
    Quick view
  • Adjustable Gain L-Band Amplifier Adjustable Gain L-Band Amplifier

    Adjustable Gain L-Band Amplifier

    SMW

    Our adjustable Gain, Low power, Line Amplifier have veryhigh IP3 and P1dB that allows installing directly after orclose to the LNB.Available with F-, N- or SMA-connectors.DC, 22 kHz and 10 MHz bypass, is standard. Options includeSeparate DC power input...
    Quick view