SLM5650B Satellite Modem

(No reviews yet) Write a Review
SKU:
SLM5650B-256
MPN:
SLM5650B-256
Weight:
5.50 KGS
Width:
4.30 (cm)
Height:
48.00 (cm)
Depth:
48.00 (cm)
$20,315.00
Frequently bought together:

Description

Overview
The SLM-5650B Satellite Modem is Comtech's latest generation USARSTRAT WGS certified modem product targeted for critical commercial backhaul and government and military applications. It is fully compliant with MIL-STD-188-165A/B and fully complies with STANAG 4486 Edition 3, Annex E (EBEM) and supports FIPS 140-2 certified encryption. The SLM-5650B leverages the heritage and feature set of our very successful SLM-5650A modem. The SLM-5650B supports backwards compatibility / inter-operability for existing SLM-5650A networks while providing enhanced performance and new features including:
Embedded:
• Gigabit Ethernet Bridge interface
• LNB reference and voltage
• BUC reference
Increased/Improved:
• Field Programmable Gate Array (FPGA)
resource increased by x5 (future proof)
• Maximum spreading factor (512)
• Maximum chip rate (64 Mcps)
• Maximum symbol rate with LDPC (40Msps)
Decreased:
• DSSS acquisition times (x8 faster)
• Power consumption (reduced ~ 25%)
• Chassis length (reduced 1.5 inches)
The SLM-5650B is compliant with the strict requirements defined in MIL-STD-188-165A, modem types I, II, IV, V and VI for applications on DSCS, WGS and commercial satellites. Data rates from 8 kbps to 155 Mbps and symbol rates from 32 ksps to 64 Msps are supported. The modem provides standard MIL-STD-188-114 (EIA-530 / RS-422), and EIA-613 (HSSI) serial interfaces, and can be optionally configured to support G.703 and Low Voltage Differential Signaling (LVDS) serial interfaces. It can also optionally be equipped with a 4-port 10/100/1000Base-T Ethernet Network Processor module that supports switching, routing and advanced Quality of Service protocols.
The SLM-5650B can be integrated with the Vipersat Management System (VMS) to provide fully automated network and capacity management (future software upgrade). An AES-256 TRANSEC module, compliant with the FIPS 140-2 standard, is also available as an option.
All traffic (including overhead and all VMS control traffic) is encrypted when using the TRANSEC module.
Advanced forward error correction (FEC) capabilities are a Comtech EF Data standard feature. Viterbi, Trellis, Concatenated Reed-Solomon, Sequential, Turbo Product Codes, and three Low Density Parity Check codes (LDPC) families are all supported.
Direct sequence spread spectrum is available to support both point-to-point and point-tomultipoint applications as an option in conjunction with LDPC-based FEC and BPSK.
Spreading factors up to 512 are supported. Maximum supported chip rate is 64 Mcps. Spread spectrum results in operation with ultralow power spectral densities. This enables use of small antenna apertures when adjacent satellite interference (ASI) is an important consideration.
The IF interface supports 52 to 88, 104 to 176, and 950 to 2000 MHz frequency ranges.
Features
• MIL-STD-188-165A compliant (Types I, II, IV, V, VI)
• Selectable 70/140 MHz and 950 – 2000 MHz IFs
• AES-256 TRANSEC, FIPS 140-2 certified
• Dynamic bandwidth allocation with Vipersat Management
System (future software upgrade)
• Support for bridged point-to-multipoint network
architecture
• BPSK, QPSK, OQPSK, 8PSK, 8-QAM, 16-QAM
• Viterbi, Reed Solomon, Trellis, Sequential, Turbo Product
Code (TPC), EBEM, & Low Density Parity Check (LDPC)
FEC
• FEC rates 1/1, 5/16, 1/2, 2/3, 3/4, 5/6, 7/8, and others
• Direct sequence spread spectrum, integer factors
2,3,4…510, 511, 512
• Direct sequence spread spectrum, chip rates up to 64
Mcps
• 8 kbps to 155.52 Mbps
• IESS-308, -309, -310, -315
• ASYNC RS-485 overhead channel & AUPC
• Asymmetrical loop timing & data source bit
synchronization
• Ethernet interface for remote control using HTTP, Telnet
and Simple Network Management Protocol (SNMP)
• EIA-485 and EIA-232 interface for remote control

Detailed data sheet on the followink link: 

https://www.comtechefdata.com/files/ds-SLM5650B.pdf

 

Product Description

Product Description

 
 

Part Number: SLM5650B-256

Part Number: SLM5650B-99

 

Description:

Description:

 

SLM5650B.1A1130111040010.0000000000.1100000000.S100

SLM5650B.1A1430432040050.1100010000.1110000000.S100

 

SLM5650B Base Unit Standard CEFD Front Panel Ruggedized (0C to  50C)

SLM5650B Base Unit Standard CEFD Front Panel Ruggedized (0C to  50C)

 

100 - 240 VAC Primary Input Power

100 - 240 VAC Primary Input Power

 

Illuminated AC Power Switch

Illuminated AC Power Switch

 

TRANSEC Module (AES-256)

TRANSEC Module (AES-256)

 

64 kbps - 5 Mbps Data Rate Range

64 kbps - 52 Mbps Data Rate Range

 

SLM-5650B (With TRANSEC Module) Latest FIPS Certified

SLM-5650B (With TRANSEC Module) Latest FIPS Certified

 

64 kbps - 5 Mbps TX Data Rate Range

64 kbps - 52 Mbps TX Data Rate Range

 

BPSK / QPSK / OQPSK Modulation Type (Standard)

BPSK / QPSK / OQPSK and 8PSK / 8QAM / 16QAM Modulation Type

 

Turbo Product Coding (Standard)

TPC and LDPC

 

Standard and 4-Port GigE (Network Processor Module)

Standard and 4-Port GigE (Network Processor Module)

 

5 Mbps RX Data Rate

155 Mbps RX Data Rate

 

SLM5650B Extended Software Quality of Service (4 Level Priority)

SLM5650B Extended Software Automatic Uplink Power Control

 

Management Security (SSL)

ASYNC RS-485 Overhead Channel

 

 

Spread Spectrum

 

SLM5650B Accessories Standard - (USA) AC Power Cord

Quality of Service (4 Level Priority)

 

Rear Mount Bracket

Management Security (SSL)

 

 

Bridged Point to Multipoint

 

Warranty Standard 2 Year Hardware Warranty Included

SLM5650B Accessories Standard - (USA) AC Power Cord

 

 

Rear Mount Bracket

 

 

Warranty Standard 2 Year Hardware Warranty Included

 
View AllClose

0 Reviews

View AllClose