null Skip to main content
Zoom the image with the mouse

Teledyne

Teledyne Outdoor PowerMAX Modular N+1 Soft-Fail, GaN Phase Combined System

No reviews yet
Condition: New
Availability: YES
Weight: 100.00 KGS

Request a quote at Contact@orbitalconnect.com or +1.888.315.9545

System Operation
The Outdoor PowerMAX system maintains complete parallel redundancy down to the
embedded control level. Therefore the loss of an entire amplifier will not interrupt remote
communications with the system. Remote communications can be either RS-485 or Ethernet.
The system will automatically correct its gain level in the event of one or more amplifier
failures.

The sophisticated system monitor and control allows the system to be locally or remotely
operated as if it were a single chassis amplifier. The system control maintains a hierarchical
management that allows the operator to interface to a single chassis of the multi-module
array.

Another feature unique to Teledyne Paradise Datacoms Outdoor PowerMAX is the
introduction of true rms output power measurement. Unlike other amplifier systems that
utilize diode detection schemes, the Outdoor PowerMAX reports the true rms output power of
the system independent of the number of carriers and modulation schemes.

Proprietary waveguide combining techniques are employed so that maximum power
combining efficiency is optimized within the operating frequency band.

 

System Output Power and Configurations
The Outdoor PowerMAX system is typically used as a self-redundant system. The output
power is sized such that the loss of (1) RF modules power will still allow the system to
maintain its minimum required output power. This type of system architecture is described as
n+1 redundant. The system can be configured with any number of modules, but best overall
efficiency is obtained with the popular binary combinations of 4 or 8 modules.

It is very easy to upgrade the PowerMAX system from 4 modules to 8 modules in the field. It
is not necessary to fully populate the system at the time of initial purchase. This provides the
user a path to upgrade output power capability as system requirements grow, thus keeping
capital investment minimized. For sizing redundant output power capability use the following
guideline to determine the output power of the system with the loss of (1) module.

4 Module System - 3 of 4 Modules Operable = 2.5 dB loss in output power capability
8 Module System - 7 of 8 Modules Operable = 1.2 dB loss in output power capability

16 Module System - 15 of 16 Modules Operable = 0.6 dB loss in output power capability

FEATURES

- Gallium Nitride amplifiers, offering higher power density
- Each array of 4 HPAs features no active switching - all passive Power Combining

- Output Power sized for N+1 Redundancy

- Can be configured with any combination of 4 to 16 units

- 100% field maintainable

- CE mark / MIL-STD-461 compliant

- Removable fan trays

- System Monitor and Control emulates single SSPA Chassis operation

- Legacy RS-485 M&C

- Ethernet Port with UDP, SNMP, and internal web browser capability

- Accurate Output Power measurement

- RF Output Sample Port

- Optional Waveguide Arc Protection Kit

- Optional L-Band Input with Redundancy

- Reflected Power Monitor

- RF Gain Adjustment (42 dB - 62 dB) Ku-Band systems (50 dB - 70 dB) all others

 System is field scalable: i.e., can start out with (4) modules in system and upgrade to (8) modules.

5 customers are viewing this product
Share:
  • Norton Secured
  • TRUSTe Verified
  • Authorized.net
  • Accredited Business
  • Verified by Visa
  • Mastercard SecureCode
 

System Operation
The Outdoor PowerMAX system maintains complete parallel redundancy down to the
embedded control level. Therefore the loss of an entire amplifier will not interrupt remote
communications with the system. Remote communications can be either RS-485 or Ethernet.
The system will automatically correct its gain level in the event of one or more amplifier
failures.

The sophisticated system monitor and control allows the system to be locally or remotely
operated as if it were a single chassis amplifier. The system control maintains a hierarchical
management that allows the operator to interface to a single chassis of the multi-module
array.

Another feature unique to Teledyne Paradise Datacoms Outdoor PowerMAX is the
introduction of true rms output power measurement. Unlike other amplifier systems that
utilize diode detection schemes, the Outdoor PowerMAX reports the true rms output power of
the system independent of the number of carriers and modulation schemes.

Proprietary waveguide combining techniques are employed so that maximum power
combining efficiency is optimized within the operating frequency band.

 

System Output Power and Configurations
The Outdoor PowerMAX system is typically used as a self-redundant system. The output
power is sized such that the loss of (1) RF modules power will still allow the system to
maintain its minimum required output power. This type of system architecture is described as
n+1 redundant. The system can be configured with any number of modules, but best overall
efficiency is obtained with the popular binary combinations of 4 or 8 modules.

It is very easy to upgrade the PowerMAX system from 4 modules to 8 modules in the field. It
is not necessary to fully populate the system at the time of initial purchase. This provides the
user a path to upgrade output power capability as system requirements grow, thus keeping
capital investment minimized. For sizing redundant output power capability use the following
guideline to determine the output power of the system with the loss of (1) module.

4 Module System - 3 of 4 Modules Operable = 2.5 dB loss in output power capability
8 Module System - 7 of 8 Modules Operable = 1.2 dB loss in output power capability

16 Module System - 15 of 16 Modules Operable = 0.6 dB loss in output power capability

FEATURES

- Gallium Nitride amplifiers, offering higher power density
- Each array of 4 HPAs features no active switching - all passive Power Combining

- Output Power sized for N+1 Redundancy

- Can be configured with any combination of 4 to 16 units

- 100% field maintainable

- CE mark / MIL-STD-461 compliant

- Removable fan trays

- System Monitor and Control emulates single SSPA Chassis operation

- Legacy RS-485 M&C

- Ethernet Port with UDP, SNMP, and internal web browser capability

- Accurate Output Power measurement

- RF Output Sample Port

- Optional Waveguide Arc Protection Kit

- Optional L-Band Input with Redundancy

- Reflected Power Monitor

- RF Gain Adjustment (42 dB - 62 dB) Ku-Band systems (50 dB - 70 dB) all others

 System is field scalable: i.e., can start out with (4) modules in system and upgrade to (8) modules.

 
Teledyne Outdoor PowerMAX Modular N+1 Soft-Fail, GaN Phase Combined System
Teledyne Outdoor PowerMAX Modular N+1 Soft-Fail, GaN Phase Combined System

Customer Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Flexible Shipping Terms

UPS, FedEx, DHL

Extended Warranty

Contact our agents

Loyalty Program

Additional savings on return customers

24/7 Technical Support

+1.844.636.3262